Mirror pool settlement

Mirror water tank in general the normal height of the overhead in 200-350mm, if you do mirror pool, please select our M115 series universal support, bearing capacity of about 1.5T, carrying capacity enough mirror pool,

Mirror pool stone gap width of the general 5mm or 3mm, of course, special backwater situation, then the partition needs 10mm,

Mirror water tank using the general 35mm-50mm thickness of stone, stone shape in general use: 600X600mm,

600X600mm stone 1 square using 2.9 universal support, 500X500mm stone 1 square use 4 universal support,

The structure of the universal support device is composed of 1 bases, 2 connecting pieces, 3 heightening parts, 4 supporting parts, 5 adjusting parts and 6 split pieces, and all the parts are connected by screw threads through 6 parts,

According to the requirements of the design and construction to adjust the height, the width of the stone gap is a "partition" control adjustment, fine adjustment of the stone to adjust the height of the rubber gasket.

Product ground installation requirements; before the construction requirements of the surface is relatively flat, do not appear on the phenomenon of local high and low,